Concrete Coatings in Phoenix: Epoxy, Polyaspartic, Flake & Quartz Floors

Lazarus Remodeling LLC installs concrete coatings for homeowners in Phoenix, North Scottsdale, and across the Valley. Maybe you want a clean garage floor epoxy finish, a UV-stable polyaspartic garage floor, or a textured, slip-resistant coating for your patio or carport. Either way, you work directly with the owner from the first estimate to the final top coat. There's no sales team and no handoffs, just honest advice and careful work on your concrete. We're licensed and insured, and every coating comes with a 5-year warranty against peeling and delamination.

What Are Concrete Coatings?

A concrete coating is a resin system that bonds to the surface of your slab and forms a tough, seamless finish. Bare concrete is porous. It soaks up oil, stains easily, collects dust, and shows every crack. A properly installed coating seals that surface, so the floor is easier to clean, looks finished, and holds up better to daily use. Most residential systems have three parts: a base coat, a decorative broadcast layer (flake or quartz), and a clear protective top coat.

Coating Systems We Install

Epoxy Flooring

Epoxy is the classic garage floor coating. It bonds strongly to properly prepared concrete and builds a thick, hard layer. It works well as a base coat and in indoor spaces like garages, shops, and basements. One honest note: many epoxies can yellow (amber) under direct sunlight. That's why we usually pair epoxy with a UV-stable top coat, or recommend a different system, for areas that get sun.

Polyaspartic Coatings

Polyaspartic coatings are UV stable, which means they resist yellowing in the sun, and they handle temperature swings well. That makes polyaspartic a strong choice for Arizona garages, patios, and carports, either as a full system or as the top coat over an epoxy base.

Full-Broadcast Flake Flooring

Flake flooring, also called flake epoxy, is the look most people picture for a finished garage. Colored vinyl flakes are broadcast into the wet base coat until the floor is fully covered, then sealed with a clear top coat. Flake hides minor imperfections in the concrete, adds light texture underfoot, and makes everyday dust and dirt less noticeable.

Quartz Broadcast Flooring

Quartz broadcast flooring uses colored quartz granules instead of vinyl flake. The result is a very durable, textured surface with excellent slip resistance. It's a great fit for heavy-use areas, workshops, walkways, and outdoor spaces where footing matters.

Where We Install Concrete Coatings

• Garage floors: Garage floor epoxy, polyaspartic, and flake systems that resist oil, stains, and wear.
• Patios: UV-stable patio concrete coatings that stand up to the Arizona sun.
• Carports: Carport concrete coatings that handle vehicle traffic and outdoor exposure.
• Walkways and entries: Textured finishes for better footing and curb appeal.
• Basements and shops: Durable, easy-to-clean floors for work and storage spaces.

Why Concrete Coatings Suit Arizona Heat and UV

Valley concrete takes a beating. Summer heat, intense UV, monsoon dust, and hot tires coming in off the street all wear on bare slabs and cheap coatings. That's why the system matters. In sun-exposed areas we lean toward UV-stable polyaspartic top coats, which resist the yellowing and fading that some epoxies show outdoors. Textured flake and quartz finishes, plus optional anti-slip additives, help with footing when monsoon rain blows into the garage or across the patio. In every case, proper surface prep is what helps a coating stay bonded through Phoenix temperature swings.

Built Over Several Days, Not Rushed in One

We don't do one-day installs. Every concrete coating we install takes multiple days, and that's on purpose. One-day floors have to squeeze grinding, repairs, and every coat into a single rushed visit. We give each step the time it needs, so the job is done right the first time.

Our Concrete Coating Process

1. Prep and grinding: We mechanically grind the concrete to open the surface and remove old sealers, paint, and contamination. This is the most important step for a lasting bond.
2. Crack repair: Cracks, chips, and spalled areas are filled and ground smooth so they don't telegraph through the finish.
3. Base coat: A base coat is applied evenly across the prepared slab.
4. Broadcast: Flake or quartz is broadcast into the wet base coat for color, texture, and coverage.
5. Top coat: Excess material is scraped and cleaned off, then a clear protective top coat is applied to seal the floor. If you want extra grip, this is when we add an anti-slip additive.
6. Cure: You can walk on your new floor after 24 hours and drive on it after 72 hours.

Our 5-Year Coating Warranty

Every concrete coating we install is backed by a 5-year warranty against peeling and delamination, including hot-tire lift.

Like any coating warranty, it has a few limits. It doesn't cover moisture vapor coming up through the slab, cracks that move, chemical damage, or normal wear. The full details are in your written estimate and contract, and we're happy to go over them with you before work begins.

Colors and Flake Blends

Flake and quartz come in a wide range of blends, from light grays and tans that stay cooler and brighten a garage, to darker, bolder mixes and solid colors. Lighter blends tend to show less dust, and multi-color blends hide everyday dirt well. During your free estimate, we'll talk through how you use the space and help you pick a color and texture that fits your home.

Why Choose Lazarus Remodeling LLC

• Owner-operated: You deal with the person doing the work, from estimate to final coat.
• Licensed and insured: Lazarus Remodeling LLC holds Arizona ROC license 362252.
• 5-year warranty: Coverage against peeling and delamination, including hot-tire lift.
• Never rushed: Multi-day installs, so every step gets the time it needs.
• Honest recommendations: We'll tell you which system fits your space and budget, even if it's the simpler option.
• Free estimates: No-pressure estimates for garage, patio, and carport coatings.
• Local: We work right here in the Valley and know what Arizona does to concrete.

Service Area

We service Phoenix, North Scottsdale, and all of the surrounding areas in the Valley.

Concrete Coatings FAQ

How long before I can walk and drive on my new floor?

You can walk on your new coating after 24 hours and drive on it after 72 hours. We'll go over the timing with you before we start so you can plan around it.

Do you offer one-day garage floor installs?

No, and that's on purpose. Our installs take multiple days so the job is done right, not rushed. The extra time lets us give the prep, the repairs, and every coat the attention they need instead of racing to finish in a single day.

Do your concrete coatings come with a warranty?

Yes. Every coating we install comes with a 5-year warranty against peeling and delamination, including hot-tire lift. Like any coating warranty, it doesn't cover moisture vapor coming up through the slab, cracks that move, chemical damage, or normal wear. The full details are in your written estimate and contract.

Will my garage floor coating have hot-tire pickup?

Hot-tire pickup happens when hot tires soften or lift a weak coating. It's most common with thin, store-bought kits or poor prep. We grind the concrete and install a professional-grade system to resist it, and our 5-year warranty covers peeling and delamination, including hot-tire lift.

Are epoxy and flake floors slippery?

Smooth, glossy coatings can be slick when wet. Flake and quartz broadcast floors add texture, which improves footing. We also offer anti-slip (nonslip) additives for extra grip in garages, patios, and other areas that get wet.

Are you licensed and insured?

Yes, we're licensed and insured. Lazarus Remodeling LLC holds Arizona ROC license 362252.

What's the difference between epoxy and polyaspartic?

Epoxy builds a thick, hard layer and bonds very well, but many epoxies can yellow in direct sun. Polyaspartic is UV stable and handles temperature swings well. Many floors use an epoxy base with a polyaspartic top coat to get the benefits of both.

How do you prepare the concrete?

We grind the slab to open the surface and remove old sealers or contaminants, then repair cracks and chips before any coating goes down. Good prep is the main thing that keeps a coating bonded.

How do I maintain a coated floor?

Sweep or dust-mop regularly and clean with a damp mop or soft brush and a mild cleaner. Wipe up spills like oil or chemicals promptly, and avoid harsh, abrasive cleaning tools.

Can you coat an outdoor patio or carport in the Arizona sun?

Yes. For outdoor and sun-exposed concrete we recommend UV-stable systems, like polyaspartic, that resist yellowing and fading. A textured finish and an optional anti-slip additive help with footing.